Description

ADAM’S BLACK TRIM RESTORER 4OZ

Adam’s black trim restorer is a temporary dye coloring to bring back a nice dark color to faded exterior trim pieces. Black trim restorer applies easily with a microfiber applicator pad, or our ceramic coating applicator, which works great for tighter spots. You will want to make sure the trim is as clean as possible before applying this product, so we would recommend wiping it down thoroughly with eco all purpose cleaner or tire & rubber cleaner first. Applying is simple and easy – pour a few drops onto the applicator, and carefully spread it across the trim piece in a nice even motion. Work the product in thoroughly and allow to dry for several hours. Then take an edgeless utility towel and wipe away any excess residue afterward. In most cases there will not be any residue, but if you apply too heavily, there may be some excess that needs to be wiped away.

Instructions:

1. Very thoroughly clean trim area to be treated. All traces of dirt and previous trim dressing must be removed. Clean area with Adam’s Tire & Rubber Cleaner or Adam’s Eco All Purpose Cleaner with an Adam’s Edgeless Utility Towel first.
2. Mask off any painted areas surrounding plastic trim to be treated with a low-tack painter’s tape. Rubber gloves are recommended to avoid discoloration on your hands and fingers as well.
3. Pour a few drops of Black Trim Restorer onto an Adam’s Microfiber Applicator Pad or an Adam’s Ceramic Coating Applicator.
4. Spread the product in a thin coat over the faded plastic trim, working it evenly into the surface.
5. Adam’s Black Trim Restorer will begin to cure in approx. 5-6 minutes. Do not touch the trim during this time. Full cure time is 6 hours or more – do not expose the plastic trim to any moisture during this cure time.
6. Repeat steps 1-5 every few months if trim begins to show signs of fading or discoloration.